1. The handmade method of automobile is as follows: First of all, we Prepare the cardboard, draw the side of the car on it, and cut it off with an art knife. Then apply hot melt glue to the edge of the rectangular cardboard, and then glue the side of the car on it, as shown in the figure.
2. Prepare materials: waste paper boxes, scissors, tape. Generally, all the cardboard boxes can be opened. When making a small car, the front part of the cardboard box should be sealed with tape, and you only need to leave a space in the driver's seat. Cut open about two-thirds of the sealing surface and turn out a piece of cardboard.
3. The simple way to make a handmade car is as follows: material preparation: colored paper, paper tube (after the toilet paper is used up), 4 mineral water bottle caps, wooden stick (remove the cotton swab head), double-sided adhesive, hot melt glue gun, scissors, etc.
4. The method of making a car by hand is as follows: First of all, prepare the materials and tools to make a toy car: a pair of scissors, a piece of colored paper, a roll of paper, and glue or double-sided glue. In addition, four bottle caps of beverage bottles are needed. Bottle caps can be of different colors, but the size must be the same, otherwise Toy cars are easy to overturn.
5. The handmade car is as follows: First, we prepare cardboard, draw the side of the car on it, and cut it with an art knife. Then apply hot melt glue to the edge of the rectangular cardboard, and then glue the side of the car on it, as shown in the figure.In the same way, cut out the top of the car with cardboard and glue it with hot melt glue.
6. Handmade car making Steps: Make a small ball with orange cotton paper and stick it to the top of the car antenna painted on the green cardboard. Cut off the car group painted on red, blue and black paper. Place the cut-off car group on the green cardboard car pattern, and then glue it.
The practice of a handmade car is as follows: cut the cardboard to the appropriate size with scissors. And glue the window and body of the car with a glue stick. Cut out the roof with scissors and connect the roof and the window with a glue stick. Cut out the front cover, front window and rear window with scissors, and glue them to the car body with a glue stick.
Handmade car foam car: First, draw the figure of the handmade car on the foam, then cut it along the line with scissors, and the rest of the work is stitching. Connect the part to be glued with double-sided adhesive, and the handmade car is completed.
The method of handmade cars is as follows: First, we prepare cardboard, draw the side of the car on it, and cut it off with an art knife.Then apply hot melt glue to the edge of the rectangular cardboard, and then glue the side of the car on it, as shown in the figure. In the same way, cut out the top of the car with cardboard and glue it with hot melt glue.
The method of making handmade cars is as follows: prepare materials: rolls, scissors, card paper, glue, toy villains, pins, pigments, self-adhesive stickers. First of all, take out the paper and paint them with rich colors with watercolor pens or pigments. The coloring process is also to develop children's imagination and aesthetic ability.
The handmade method of the car is as follows: First of all, prepare the materials and tools to make the toy car: a pair of scissors, a piece of colored paper, a roll of paper tube, and glue or double-sided adhesive. In addition, four bottle caps of beverage bottles are required. The bottle caps can be of different colors, but the size must be the same, otherwise the toy Small cars are prone to overturn.
1. Use a ruler and a knife to cut the toothpaste box into two pieces, one end into a carriage and the other end into a front of the car, with a ratio of 3:1. Draw the oblique line on the front of the car with a pen and ruler, and then cut it with a knife. Fold it and stick it with double-sided adhesive and transparent adhesive, so that the front of the car will come out.
2. First, cut the cardboard box into the body of the car, as shown in the figure. Then stick the colored paper on the carton and wrap the car, as shown in the figure. Take out another piece of colored paper and roll it into a cylindrical shape, as shown in the figure. Cut the cylindrical colored paper into wheels, and then put it on with a toothpick, as shown in the figure.
3. The simple way to make a car by hand is as follows: materialsPreparation: colored paper, paper tube (after the toilet paper is used up), 4 mineral water bottle caps, wooden sticks (remove the cotton swab head), double-sided adhesive, hot melt glue gun, scissors, etc.
4. The method of making a car by hand is as follows: First of all, prepare the materials and tools to make a toy car: a pair of scissors, a piece of colored paper, a roll of paper, and glue or double-sided glue. In addition, four bottle caps of beverage bottles are needed. Bottle caps can be of different colors, but the size must be the same, otherwise Toy cars are easy to overturn.
5. The car is handmade as follows: preparation materials: scissors, cardboard boxes, pens. Cut the cardboard box into the required shape to make the front, body and rear of the car. Cut out four circles to make wheels. Combine the cut cardboard, stick it with tape, glue the cut wheels to the car body, and then draw the eyes and mouth on the car.
6. The method of making handmade cars is as follows: prepare materials and tools. Making handmade cars requires preparing some materials and tools. Commonly used materials include cardboard, wooden strips, rubber bands, plastic tires, etc. In terms of tools, you need to prepare scissors, glue, small hammers, nails, etc.
1. Use a ruler and a small knife to cut the toothpaste box into two pieces, one end into a carriage, and the other end into the front of the car, with a ratio of 3:1. Draw the oblique line on the front of the car with a pen and ruler, and then cut it with a knife. Fold it and stick it with double-sided adhesive and transparent adhesive, so that the front of the car will come out.
2. First, cut the cardboard box into the body of the car, as shown in the figure. Then stick the colored paper on the carton and wrap the car, as shown in the figure.Take out another piece of colored paper and roll it into a cylindrical shape, as shown in the figure. Cut the cylindrical colored paper into wheels, and then put it on with a toothpick, as shown in the figure.
3. Production process: Observe the appearance of the box. If there is a beautiful appearance, it can be used as decoration. The smiling face shown in the picture below. Measure the size with a ruler and cut out the front of the car as shown in the figure. The cut scrap is of good size to make the head cover. Dig out the front windshield mouth of the front cover.
4. Handmade car foam car: First, draw the figure of the handmade car on the foam, and then cut it along the line with scissors, and the rest of the work is splicing. Connect the part to be glued with double-sided adhesive, and the handmade car is completed.
5. The simple way to make a handmade car is as follows: required materialsMaterials: colored paper, paper tube (after the toilet paper is used up), 4 mineral water bottle caps, wooden sticks (remove the cotton swab head), double-sided adhesive, hot melt glue gun, scissors, etc.
6. Steps to make a handmade car: First, draw an oval in the middle of the toilet paper roll, and carefully cut out the oval area as the driver's seat area. Then draw a circle on the paper plate, cut it out, and draw the car lights and air intake grid decorations (as the front face of the car) on the circle.
1. Observe the appearance of the box. If there is a beautiful appearance, it can be used as a decoration. The smiling face shown in the picture below. Measure the size with a ruler and cut out the front of the car as shown in the figure. The cut scrap is of good size to make the head cover.Dig out the front windshield mouth of the front cover. Paste transparent plastic with glue as the front glass.
2. The method of making handmade cars is as follows: prepare materials: rolls, scissors, paper cards, glue, toy villains, pins, pigments, self-adhesive stickers. First of all, take out the paper and paint them with rich colors with watercolor pens or pigments. The coloring process is also to develop children's imagination and aesthetic ability.
3. Toothpaste box car It is also very simple to make a toothpaste box into a car. Prepare two medium-sized toothpaste boxes, cut out the shape of the window with scissors in the appropriate place of the toothpaste box, and then cut the remaining toothpaste box paper into a circle and paste it on both sides of the toothpaste box to make wheels.
4. The simple way to make a car by hand is as follows: required materials: colored paper,Paper tube (after the toilet paper is used up), 4 mineral water bottle caps, wooden sticks (remove the cotton swab head), double-sided adhesive, hot melt glue gun, scissors, etc.
Binance app-APP, download it now, new users will receive a novice gift pack.
1. The handmade method of automobile is as follows: First of all, we Prepare the cardboard, draw the side of the car on it, and cut it off with an art knife. Then apply hot melt glue to the edge of the rectangular cardboard, and then glue the side of the car on it, as shown in the figure.
2. Prepare materials: waste paper boxes, scissors, tape. Generally, all the cardboard boxes can be opened. When making a small car, the front part of the cardboard box should be sealed with tape, and you only need to leave a space in the driver's seat. Cut open about two-thirds of the sealing surface and turn out a piece of cardboard.
3. The simple way to make a handmade car is as follows: material preparation: colored paper, paper tube (after the toilet paper is used up), 4 mineral water bottle caps, wooden stick (remove the cotton swab head), double-sided adhesive, hot melt glue gun, scissors, etc.
4. The method of making a car by hand is as follows: First of all, prepare the materials and tools to make a toy car: a pair of scissors, a piece of colored paper, a roll of paper, and glue or double-sided glue. In addition, four bottle caps of beverage bottles are needed. Bottle caps can be of different colors, but the size must be the same, otherwise Toy cars are easy to overturn.
5. The handmade car is as follows: First, we prepare cardboard, draw the side of the car on it, and cut it with an art knife. Then apply hot melt glue to the edge of the rectangular cardboard, and then glue the side of the car on it, as shown in the figure.In the same way, cut out the top of the car with cardboard and glue it with hot melt glue.
6. Handmade car making Steps: Make a small ball with orange cotton paper and stick it to the top of the car antenna painted on the green cardboard. Cut off the car group painted on red, blue and black paper. Place the cut-off car group on the green cardboard car pattern, and then glue it.
The practice of a handmade car is as follows: cut the cardboard to the appropriate size with scissors. And glue the window and body of the car with a glue stick. Cut out the roof with scissors and connect the roof and the window with a glue stick. Cut out the front cover, front window and rear window with scissors, and glue them to the car body with a glue stick.
Handmade car foam car: First, draw the figure of the handmade car on the foam, then cut it along the line with scissors, and the rest of the work is stitching. Connect the part to be glued with double-sided adhesive, and the handmade car is completed.
The method of handmade cars is as follows: First, we prepare cardboard, draw the side of the car on it, and cut it off with an art knife.Then apply hot melt glue to the edge of the rectangular cardboard, and then glue the side of the car on it, as shown in the figure. In the same way, cut out the top of the car with cardboard and glue it with hot melt glue.
The method of making handmade cars is as follows: prepare materials: rolls, scissors, card paper, glue, toy villains, pins, pigments, self-adhesive stickers. First of all, take out the paper and paint them with rich colors with watercolor pens or pigments. The coloring process is also to develop children's imagination and aesthetic ability.
The handmade method of the car is as follows: First of all, prepare the materials and tools to make the toy car: a pair of scissors, a piece of colored paper, a roll of paper tube, and glue or double-sided adhesive. In addition, four bottle caps of beverage bottles are required. The bottle caps can be of different colors, but the size must be the same, otherwise the toy Small cars are prone to overturn.
1. Use a ruler and a knife to cut the toothpaste box into two pieces, one end into a carriage and the other end into a front of the car, with a ratio of 3:1. Draw the oblique line on the front of the car with a pen and ruler, and then cut it with a knife. Fold it and stick it with double-sided adhesive and transparent adhesive, so that the front of the car will come out.
2. First, cut the cardboard box into the body of the car, as shown in the figure. Then stick the colored paper on the carton and wrap the car, as shown in the figure. Take out another piece of colored paper and roll it into a cylindrical shape, as shown in the figure. Cut the cylindrical colored paper into wheels, and then put it on with a toothpick, as shown in the figure.
3. The simple way to make a car by hand is as follows: materialsPreparation: colored paper, paper tube (after the toilet paper is used up), 4 mineral water bottle caps, wooden sticks (remove the cotton swab head), double-sided adhesive, hot melt glue gun, scissors, etc.
4. The method of making a car by hand is as follows: First of all, prepare the materials and tools to make a toy car: a pair of scissors, a piece of colored paper, a roll of paper, and glue or double-sided glue. In addition, four bottle caps of beverage bottles are needed. Bottle caps can be of different colors, but the size must be the same, otherwise Toy cars are easy to overturn.
5. The car is handmade as follows: preparation materials: scissors, cardboard boxes, pens. Cut the cardboard box into the required shape to make the front, body and rear of the car. Cut out four circles to make wheels. Combine the cut cardboard, stick it with tape, glue the cut wheels to the car body, and then draw the eyes and mouth on the car.
6. The method of making handmade cars is as follows: prepare materials and tools. Making handmade cars requires preparing some materials and tools. Commonly used materials include cardboard, wooden strips, rubber bands, plastic tires, etc. In terms of tools, you need to prepare scissors, glue, small hammers, nails, etc.
1. Use a ruler and a small knife to cut the toothpaste box into two pieces, one end into a carriage, and the other end into the front of the car, with a ratio of 3:1. Draw the oblique line on the front of the car with a pen and ruler, and then cut it with a knife. Fold it and stick it with double-sided adhesive and transparent adhesive, so that the front of the car will come out.
2. First, cut the cardboard box into the body of the car, as shown in the figure. Then stick the colored paper on the carton and wrap the car, as shown in the figure.Take out another piece of colored paper and roll it into a cylindrical shape, as shown in the figure. Cut the cylindrical colored paper into wheels, and then put it on with a toothpick, as shown in the figure.
3. Production process: Observe the appearance of the box. If there is a beautiful appearance, it can be used as decoration. The smiling face shown in the picture below. Measure the size with a ruler and cut out the front of the car as shown in the figure. The cut scrap is of good size to make the head cover. Dig out the front windshield mouth of the front cover.
4. Handmade car foam car: First, draw the figure of the handmade car on the foam, and then cut it along the line with scissors, and the rest of the work is splicing. Connect the part to be glued with double-sided adhesive, and the handmade car is completed.
5. The simple way to make a handmade car is as follows: required materialsMaterials: colored paper, paper tube (after the toilet paper is used up), 4 mineral water bottle caps, wooden sticks (remove the cotton swab head), double-sided adhesive, hot melt glue gun, scissors, etc.
6. Steps to make a handmade car: First, draw an oval in the middle of the toilet paper roll, and carefully cut out the oval area as the driver's seat area. Then draw a circle on the paper plate, cut it out, and draw the car lights and air intake grid decorations (as the front face of the car) on the circle.
1. Observe the appearance of the box. If there is a beautiful appearance, it can be used as a decoration. The smiling face shown in the picture below. Measure the size with a ruler and cut out the front of the car as shown in the figure. The cut scrap is of good size to make the head cover.Dig out the front windshield mouth of the front cover. Paste transparent plastic with glue as the front glass.
2. The method of making handmade cars is as follows: prepare materials: rolls, scissors, paper cards, glue, toy villains, pins, pigments, self-adhesive stickers. First of all, take out the paper and paint them with rich colors with watercolor pens or pigments. The coloring process is also to develop children's imagination and aesthetic ability.
3. Toothpaste box car It is also very simple to make a toothpaste box into a car. Prepare two medium-sized toothpaste boxes, cut out the shape of the window with scissors in the appropriate place of the toothpaste box, and then cut the remaining toothpaste box paper into a circle and paste it on both sides of the toothpaste box to make wheels.
4. The simple way to make a car by hand is as follows: required materials: colored paper,Paper tube (after the toilet paper is used up), 4 mineral water bottle caps, wooden sticks (remove the cotton swab head), double-sided adhesive, hot melt glue gun, scissors, etc.
923.95MB
Check766.71MB
Check389.59MB
Check124.38MB
Check556.56MB
Check344.61MB
Check243.48MB
Check493.97MB
Check265.32MB
Check536.76MB
Check695.36MB
Check925.77MB
Check968.21MB
Check395.37MB
Check763.59MB
Check224.66MB
Check876.37MB
Check462.69MB
Check116.32MB
Check641.45MB
Check756.64MB
Check163.35MB
Check436.52MB
Check423.22MB
Check925.25MB
Check172.58MB
Check653.41MB
Check266.37MB
Check851.57MB
Check399.15MB
Check489.61MB
Check511.24MB
Check815.45MB
Check567.98MB
Check445.24MB
Check598.35MB
CheckScan to install
Binance app to discover more
Netizen comments More
719 蜂附云集网
2025-01-23 01:43 recommend
1635 蝇营狗苟网
2025-01-23 01:12 recommend
2897 历历在目网
2025-01-23 00:53 recommend
2732 明验大效网
2025-01-23 00:31 recommend
1154 乐不思蜀网
2025-01-23 00:07 recommend