Binance APK

Corolla engine protection plate (Corolla engine protection plate replacement guide) If you are Binance APKa car owner, you must know that the engine protection of the vehicle is crucial. The engine is prone to various corrosion and collisions from the road surface during driving, so it needs a good protection device. The Corolla engine guard is such a good protective device. It can not only protect the engine, but also make the vehicle look more beautiful. If you want to add some additional protection to your Corolla engine, or if your Corolla is worn out and needs to be replaced, this article will introduce some detailed information to guide you on how to replace the Corolla engine guard. 1. First, learn about the types and installation methods of Corolla engine guards. There are two main types of Corolla engine guards: aluminum and plastic.Plastic guards are relatively light, but not as strong as aluminum. The installation method is similar and can be installed in the front or rear of the vehicle. Two. Prepare the required materials and tools. We need to prepare the following materials and tools to replace the Corolla engine guard: - New Corolla engine guard - Heat insulation pad - Thin wrench - Special bolts - Sliding wrench - Disc cam tool - Torque wrench 3. Start replacing the Corolla engine guard. - First, open the hood of the Corolla. Then use a sliding wrench to place the vehicle in a rising position for easy operation. Use a thin wrench to remove the old engine protection plate and remove it from the vehicle. - Then, replace the heat insulation pad. If you find that the heat-insulating pad is old and brittle, you should replace it. The heat-insulating pad will help the engine prevent the airflow from being affected by the temperature difference and humidity of the road surface.- Smaller vehicles may need a special bolt to ensure the fastening of the guard plate. The special bolts should be placed on the new Corolla engine guard plate and tightened. - Next, put the engine guard plate under the vehicle. Pay attention to the positioning of the installation and ensure that the guard plate is aligned with the mounting hole on the roof, which will ensure that the guard plate is installed correctly. Set it to protect the engine and reduce the passing of the wind. - Install the fixing bolt and tighten the protective plate with a torque wrench. Make sure to use the appropriate torque (detailed in the vehicle user manual); if you are not sure about the setting of the torque, please consult a professional technician. - Finally, run the vehicle, observe the texture of the guard and check for any abnormal vibration or noise. If you find any problems or abnormalities, it is recommended to take your vehicle to a qualified technical center for testing and correction.In a word, replacing the Corolla engine guard requires caution and patience. For those car owners who love their vehicles, this is not only a process of replacing the guard, but also a deep understanding of the field of vehicle self-protection and maintenance knowledge.

Contact Us
Phone：020-83484633