OKX Wallet extension

List of contents of this article:

• 1, Can the car engine fault light be turned on?
• 2、Can you still drive when the engine fault light is on
• 3, Can I still drive when the engine indicator light is on?
• 4, Can the engine fault light still be turned on?
• 5、 Can it continue to drive when the engine fault light is on?Is it
• 6, Can the car engine fault light still be turned on?

Can the car engine fault light be turned on?

1. If the engine fault light is on, you need to be alert, and you can continue to drive. Many people are afraid that there will be a big problem with the vehicle when they see the engine-related light on. The full name of this light is actually the engine exhaust emission detection light, which is to pay attention to exhaust emissions. If this light is on, it means that there is a problem with the vehicle's emissions.

2. The fault light of the car engine is on and cannot be turned on. There are three reasons for the failure: carbon accumulation, the reason why the acceleration of the car disappears. One phenomenon is the accumulation of carbon in valves, idling motors, intake ducts, combustion chambers, spark plugs and other parts, causing the car to turn off when idling. Driving on the blocked road.

3. The engine fault light is on and cannot continue to be turned on. Once the engine fault light lights up, the owner can check according to the following three points: First, check whether the engine is running normally, whether there are problems such as jitter, black smoke or difficulty in starting, and try not to start again. It is very likely that there is a problem with the engine.

4. Generally, the engine fault light is on. Usually, if there is no particularly obvious fault, it is okay to drive at low speed cautiously. But if the engineIf there are obvious faults, such as serious abnormal noise, serious shaking, engine smoke, etc., do not drive on the road. It is best to contact the repair shop and wait for rescue.

Can it still be turned on when the engine fault light is on

1. If the engine fault light is on, you need to be alert and you can continue to drive. Many people are afraid that there will be a big problem with the vehicle when they see the engine-related light on. The full name of this light is actually the engine exhaust emission detection light, which is to pay attention to exhaust emissions. If this light is on, it means that there is a problem with the vehicle's emissions.

2. If the engine fault light is on, it can't continue to drive. The biggest possibility of the engine fault light is that there is a problem with the fuel emission system, and the most prone to problems in the emission system is the oxygen sensor.

3. The engine fault light is on and cannot continue to be turned on. Once the engine fault light lights up, the owner can check according to the following three points: First, check whether the engine is running normally, whether there are problems such as jitter, black smoke or difficulty in starting, and try not to start again. It is very likely that there is a problem with the engine.

4. If you continue to drive, the fault may become bigger, damage the engine, or cause other failures, so it is not recommended to continue driving. You should call for help and wait for support. Don't start the car when the lights are on. This may be affected by the failure of the fuel pump or ignition components. I can't drive even if I want to.

5. If the engine fault light is on, there is no abnormal sound in the cabin, there are no other abnormal prompts on the instrument, the vehicle power is not affected, and there is no shadow in the gearbox upshift.Sound, you can continue to drive and stop the 4S store for further investigation, because the intake and exhaust gas, etc. may cause the engine fault light to turn on. The specific problem will be analyzed.

6. If the engine fault light is on, it is not recommended to continue to drive. It needs to be repaired as soon as possible.

Can I still drive when the engine indicator light is on?

After the fault indicator light goes out, there is no problem. If the light is still on, read the fault code and repair the car according to the detected fault information. The fault light of the car engine is on and can't be started. There are three reasons for the failure: carbon accumulation, the reason why the acceleration of the car disappears.

The engine fault indicator light is on, and the vehicle can be driven, but there are symptoms of violent shaking or the disappearance of acceleration. In the face of this situation, don't give it to me bravely. If you continue to drive, the fault may become larger, damage the engine, or cause other failures, so it is not recommended to continue running. You should call for help and wait for support.

The engine fault sign can still be turned on when it lights up, but it is recommended to troubleshoot as soon as possible. Engine indicator refers to the indicator used to display the working status of the vehicle engine.There are two situations when the engine fault light is on: the yellow symbol light indicates that the engine is faulty, but this fault does not affect the normal operation of the engine, but needs to be checked and maintained.

The engine fault light is on and can't continue to drive. Once the engine fault light lights up, the owner can check according to the following three points: First, check whether the engine is running normally, whether there are problems such as jitter, black smoke or difficulty in starting, and try not to start again. It is very likely that there is a problem with the engine.

Can the engine fault light still be turned on?

1. If the engine fault light is on, there is no abnormal sound in the cabin, there are no other abnormal prompts on the instrument, the vehicle power is not affected, and the gearbox upshift is not affected, you can continue to drive.The 4S store will further investigate, because the intake and exhaust gas, etc. may cause the engine fault light to turn on. The specific problems will be analyzed in detail.

2. Whether the engine fault light of Pacific Automobile Network can continue to be turned on depends on the specific situation. If the yellow engine fault light is on, it can continue to drive under the condition that the vehicle is running normally, but it needs to drive the vehicle to the maintenance agency for processing as soon as possible. If it is a red engine fault light Light up immediately under the premise of safety.

3. If the engine fault light is on, it can't continue to turn on. The biggest possibility of the engine fault light is that there is a problem with the fuel emission system, and the most prone to problems in the emission system is the oxygen sensor.

4. If the engine fault light is on, it is not recommended to continue to drive. It needs to be repaired as soon as possible.

5. The fault light is on, high-speed driver, the engine system is in a faulty working state, due to timely inspection and maintenance. The computer will save the fault information, which can provide reference to the maintenance personnel during maintenance, so that they can solve the fault faster.

6. If the sensor or actuator is damaged, the engine will not work properly. At this time, the engine fault light will turn on. Most car engine failures are caused by electronic systems. It is normal for the electronic system around the engine to fail after working in a high temperature environment for a long time. If the electronic system is damaged, just replace it.

Can it continue to open when the engine fault light is on?

1. Can't continue to drive when the engine fault light is on.The biggest possibility of the engine fault light is that there is a problem with the fuel emission system, and the most prone to problems in the emission system is the oxygen sensor.

2. Whether the engine fault light of Pacific Automobile Network can continue to be turned on depends on the specific situation. If the yellow engine fault light is on, it can continue to drive under the condition that the vehicle is running normally, but it needs to drive the vehicle to the maintenance agency for processing as soon as possible. If it is a red engine fault light Light up immediately under the premise of safety.

3. If the engine fault light is on, the car feels weak when accelerating, or the car shakes louder, which is different from the usual feeling of driving. In this case, it is still not recommended to continue driving. It's better to call the police for help and tow the car for repair as soon as possible. Because this kind of failure is generally relatively large, it is very dangerous to continue driving on the road.

4. If the engine fault light is on, it is not recommended to continue to drive. It needs to be repaired as soon as possible.

5. Generally, the engine fault light is on. Usually, if there is no particularly obvious fault, it is still possible to drive at low speed cautiously. However, if there is an obvious fault in the engine, such as serious abnormal noise, serious shaking, engine smoke, etc., you must not drive on the road. It is best to contact the repair shop for rescue.

6. There is no impact on the gear shifting of the gearbox, and you can continue to drive to the repair shop for further investigation. There are many reasons why the engine fault warning light turns on, which may be the combustion state in the cylinder is not good, the engine burst (the engine combustion is abnormal, the pressure curve has high frequency, fluctuates greatly, and the cylinder block will break through in severe cases), carbon accumulation inside the engine, etc.

Can the car engine fault light still be turned on?

The engine fault light is on and cannot continue to be turned on. Once the engine fault light lights up, the owner can check according to the following three points: First, check whether the engine is running normally, whether there are problems such as jitter, black smoke or difficulty in starting, and try not to start again. It is very likely that there is a problem with the engine.

If the engine fault light is on, there is no abnormal noise in the cabin, there is no other abnormal prompt in the instrument, the power of the vehicle is not affected, and the gearbox upshift is not affected, you can continue to drive and stop the 4S store for further investigation, because the intake and exhaust, etc. may cause the engine fault light to turn on, and analyze the specific problems.

After the fault indicator light goes out, there is no problem. If the light is still on, read the fault code and repair the car according to the detected fault information.The fault light of the car engine is on and can't be started. There are three reasons for the failure: carbon accumulation, the reason why the acceleration of the car disappears.

If the engine fault light is on, there is no abnormal noise in the cabin, there are no other abnormal prompts on the instrument, the vehicle power is not affected, and the gearbox upshift is not affected, you can continue to drive. The exhaust fault light is on and you can continue to drive, not all exhaust faults.